Landfill and biogas monitoring solutions including surface emissions, well field monitoring and fixed position gas monitoring.
The INSPECTRA® LASER is a natural gas leak portable analyzer with laser spectroscopy. This highly sensitive detector offers all the advantages of optical detection in a highly compact and portable device, giving you precise and reliable findings when detecting methane leaks.
- Total selectivity to methane
- Extended measurement range, from 1ppm to 100% gas volume
- Methane high sensitivity, below 1 ppm
- ATEX certified, can be used safely indoors and outdoors as well as in hazardous areas
- Minimal maintenance
- Traceability of surveys with the NGS survey software installed on a tablet and controlling the integrated GPS receiver
- Light weight, compact design for maximum working comfort (2,7 kg with batteries)
- Maximum operational autonomy: power supplied by rechargeable batteries
Natural gas monitoring solutions including stationary, waking and vehicle options for leak detection and repair, as well as pipeline maintenance and CNG/LNG applications.
Renewable natural gas monitoring solutions for inlet/biogas monitoring, outlet/RNG monitoring, facility maintenance and environmental compliance.
Coal bed methane monitoring solutions for successful carbon credit verification, GHG reporting and RNG projects.
|Response Time, T90||CH4||
|Gases Measured||CH4||by laser spectroscopy|
|Range||CH4||0-10,000 ppm and 0 to 100% gas volume|
0-1,000 ppm ± 2.5%
Visual (LED and LCD displays) and audio warnings
|Status Indicators||Include: Battery charge level and Pump status (speed 1 or 2)|
|Gas Connection||Quick connect inlet coupling with locking mechanism: Gas Inlet|
|Keypad||5 Direct control keys
Advanced function control with protected access scrolling menu
|Battery Type||Either with rechargeable battery pack: 3 x 1.2 V - 4 A/h NiCd in accordance with ATEX directive OR with Alkaline type D batteries: 3 x 1.5 V alkaline cells in accordance with ATEX directive|
|Charge Time||Typical use (pump on speed 2):
-8 hours at 68°F with all functions on.
-6 hours at temperatures below 32°F with all functions on.
-6 hours at temperatures above 95°F with all functions on.
|Battery Charger||100 to 240 VAC/50-60 Hz battery charger for ATEX battery pack|
|Charge Time||Approximately 10-12 hours from full discharge|
|Output||55 l/h and 65 l/h - 2 speed pump with status indicator on display|
|Operating Temperature Range||5°F – 122°F (-10°C - 50°C)|
|Relative Humidity||0-95% non condensing|
|Barometric Pressure Accuracy||Atmospheric pressure 29.9 in Hg (± 3 in Hg)|
|Size||10.3 x 4.4 x 5.5 inches|
|Case Material||Polyamide reinforced with fibreglass and carbon. Front panel: anodised aluminium|
|Display||Liquid crystal display with digits, icons and backlighting
3 areas: Concentration measurements (0-10,000ppm and 0.0% to 100% gas volume)Status indicator and dialogue
Height of measurement character for ppm scale: 13mm
Height of measurement character for gas scale: 13mm Storage
|ATEX||II 2G Ex ib IIA T1 Gb (Ta= -10°C to +50°C)|
94/9/CE directive dated March 23rd 1994
89/336/CE CEM directive dated May 23rd 1989
Important Note: Due to ECOTEC’S continuous program of improvement, this specification is subject to change without prior notice.