Landfill and biogas monitoring solutions including surface emissions, well field monitoring and fixed position gas monitoring.
The FAU-TDL uses Tunable Diode Laser Technology to enable accurate and reliable measurements with no drift over time or cross gas sensitivity. This analyzer is the most reliable and cost effective solution for Carbon Credit verification and Green House Gas (GHG) reporting. The development of ECOTEC’s FAU-TDL is the culmination of research by NASA’s Jet Propulsion Laboratory for use on Mars. The optical system uses a laser to produce a specific wavelength of light tuned to an absorption line, the known light frequency of the target gas. This technique produces an analyzer with a fast response speed, where the laser light stimulates vibrations and rotation in the molecule, resulting in energy absorption and enabling the sensing of gas.
- Fixed position gas analyzer with Tunable Diode Laser. CH4 Only.
- Fixed position gas analyzer with Tunable Diode Laser. CH4 & O2
- Fixed position gas analyzer with Tunable Diode Laser. CH4, CO2, & O2
- Option 2-03 NEMA4X with Internal FAUCU
- Option 3-01 Cold Weather Package
- Option 4-01 Lock for NEMA 4/4X Enclosures qty of (2)
- Option 5-02 H2S 0-5,000 ppm
- Option 6-01 Window Only 9″ X 6″ NEMA 4X
Renewable natural gas monitoring solutions for inlet/biogas monitoring, outlet/RNG monitoring, facility maintenance and environmental compliance.
Coal bed methane monitoring solutions for successful carbon credit verification, GHG reporting and RNG projects.
Carbon credit verification and green house gas (GHG) reporting solutions managed across the globe.
|Gases Measured||CH4||By Tunable Diode Laser|
|CO2||By Tunable Diode Laser|
|O2||By internal electrochemical cell|
|Gas Accuracy||CH4||± 1.0%|
|Gas Conditioning||Particle removal||Particles > 20 microns|
|Liquid removal||Can sample on wet or dry basis: gas must be non-condensing|
|Response Time, T90||< 15 SECONDS @ 90% flow|
|NEMA 4x enclosure||36”H x 24”W x 9”D (915mm x 610mm x 288mm)|
|Flow Rate||200-2000 ml/min|
|Vacuum / Pressure||-120” W.C. Max
+4 PSI Max
|Ambient Temperature Range||
35°F to 140°F (2°C to 60°C) as standard
-4°F to 158°F (-20°C to +70°C) with cold weather package
|Relative Humidity||0-95% non condensing|
|Power Requirements||90-240 VAC, 50-60 Hz 1.4A|
|Temperature Probe||±1°C of reading -22°F to 266°F (-30°C to +130°C)|
Important Note: Due to ECOTEC’S continuous program of improvement, this specification is subject to change without prior notice.